Register and win!www.kaercher.comB 80 W Bp59643610 03/13
- 5To improve the vacuuming result on tiled floors the vacuum bar can be turned to an oblique position of up to 5°. Loosen the wing nuts. Turn
- 6 Confirm the changed setting by press-ing the Info button or wait till the set val-ue is automatically accepted after 10 seconds. Select th
- 71 Wear indicator2 Vacuum lipThe vacuum lips must be replaced or re-versed if they are worn down to the wear in-dicator. Remove the vacuum bar
- 8Please observe the following warning notes when handling batteries: DangerDanger of explosion. Do not put tools or similar on the battery, i.
- 9DangerRisk of injury! Before working on the appli-ance, remove the Intelligent Key and the mains plug of the charger. Drain and dispose of t
- 10AccessoriesBR appliance B 80 (brush roller accessories)Description Part no.: Working width 650 mmPart no.: Working width 750 mmDescriptionPac
- 11We hereby declare that the machine de-scribed below complies with the relevant basic safety and health requirements of the EU Directives, bot
http://www.kaercher.com/dealersearch
- 1Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subse
- 21 Parking brake2 Rotary handle to incline the vacuum bar3 Height adjustment of suction bar4 Wing nuts for fastening the vacuum bar5 Suction ho
- 31 OFFDevice is switched off2 Transport modeDriving to the Place of Use.3 Eco modeWet clean the floor (with reduced brush speed) and vacuum up
- 4 Insert the vacuum bar into the vacuum bar suspension in such a manner that the profiled sheet is positioned above the suspension. Tighten t
Kommentare zu diesen Handbüchern